★★★一直被模仿,从未被超越!★★★
淞江集团减震器高端品牌,质保十年!
当前位置:网站首页 >>产品展示 >> 减震器 >> 橡胶减震垫|上海淞江橡胶减震垫

减震器

导读:

减震器

所属类目:减震器 站点:上海淞江减震器制造有限公司 更新日期:2015-04-28

简介:SD型橡胶剪切隔震垫以耐油橡胶为弹性材料经硫化模压成型,其波浪状表面可降低隔震垫垂向刚度,隔震垫基本块尺寸为84x84x20(mm)该系列产品由一种规格尺寸,三种橡胶硬度隔震垫组成,承载范围从0.2KN~6KN。

 
SD型橡胶减震垫性能表SD Rubber vibration isolation mat performance table
 橡胶减震垫,上海橡胶减震垫,淞江橡胶减震垫
橡胶减震垫,上海橡胶减震垫,淞江橡胶减震垫
橡胶减震垫,上海橡胶减震垫,淞江橡胶减震垫
橡胶减震垫,上海橡胶减震垫,淞江橡胶减震垫
橡胶减震垫,上海橡胶减震垫,淞江橡胶减震垫
产品重要特点与用途Characteristics and use of products
 SD型橡胶剪切隔震垫以耐油橡胶为弹性材料经硫化模压成型,其波浪状表面可降低隔震垫垂向刚度,隔震垫基本块尺寸为84x84x20(mm)该系列产品由一种规格尺寸,三种橡胶硬度隔震垫组成,承载范围从0.2KN~6KN。为提高隔震效果,可多层隔震垫串联使用,并各层之间以金属薄板(3mm)隔开,n层串联隔震垫总刚度为单层的1/n倍,考虑到垂向稳定性,串联后隔震垫的总高度不应超过隔震垫的宽度,当被隔震体较轻时,可将隔震分割成1/2块使用,分割后隔震垫承载能力及刚度也为原来的1/2倍,分割后的隔震垫也可再串联使用。The SD rubber  shock absorber is manufactured by vulcanization using oil resistant rubber and stretch materials: whost surface can reduce the vertical rigidity.The basic dinension of the shock absorber cushion is 84x84x20(mm).The load range covers from 0.2~6KN.It needs no isolation walls.To improve shock absorption effect, multi-layer. isolation cushion should be used.Sepa-rate, layers can be separated by metal sheet(3mm). The total rigidity of n layers of cushion are 1/n that of a single layer.When the isolated object is relatively lighter, you can cut it into 2 pieces.The rigidity is 1/2 that of the original one. The separated isolating cushion can also be used in series.

SD型橡胶减震垫采用优质橡胶为材料,有圆形凹陷镂空、剪切瓦楞形。一般以剪切形受力为主,具有固有频率低、结构简单、使用方便。为了提高减震效果可将减震垫适合二层、三层、四层串联使用。适用于水泵、风机、压缩机、冷水机组、柴油机组等机械设备消极减震。SD type rubber shock pad is made of high quality rubber as the material, there is a circular depression, corrugated hollow shear. In general, shear force, has low natural frequency, simple structure, easy to use. In order to improve the damping effect of the damping pad for two layer, three layer, four layer series. Suitable for water pump, fan, compressor, chiller, diesel and other mechanical equipment of negative damping.

产品尺寸:170*170*20     150*150*20     120*120*20
Product size